WORKX Robot Lawn Movers m500 And m700

18 July – Planning to get a WORKX m500 or m700 Robot lawn mower? This is a guide on where one can buy it, set it up and have it running in no time. The m500 and m700

lawn mowers have come out with several fascinating features. It has a washable deck so that one can clean it easily. It has super low noise and even Wi-Fi connectivity. Has one ever imagined sitting at home in the AC air while having a robot cut the grass through Wi-Fi? It is great how one can save time doing just that. And the noise level is only 67 decibels, which is just a little louder than an electronic razor.

Features Of WORKX Landroid m500 And m700:

These WORKX Landroid m500 and m700 have a lot of great features that one must know about if they’re interested in it. One can determine whether it is right for them or not by evaluating their features. For one to know whether it is the right fit for them, one can take a look at its features:

  • These robot movers are perfect for medium-sized gardens up to the size of 500 square meters.
  • It can manage slopes of up to only an angle of 20 degrees from the ground as it is made mostly for flat surfaces with lesser slopes.
  • It can adjust its own schedule using the smart schedule feature. It does this according to the size of the lawn, the grass growth and weather conditions. It comes up with an optimal moving plan to carry its tasks out.
  • It reliably navigates through narrow passages efficiently. It uses Artificial Intelligence(AIA technology) to do this.
  • This is an ideal choice for medium-sized complex lawns. It also has multi-zone programing for remote areas of the lawn.
  • One can control, manage and keep an eye on the robotic lawn mower through the Landroid app.

Where to buy it?

First, one will have to buy it to use it. And to do just this, one can head over to https://evxstore.com/en/  and make their purchase. But why to this place? It is a great place to buy electronic equipment as it has free shipping available for all its customers. They also accept the product if one wants to return it, and they refund all their cash as long as it is done in 30 days. And there are no extra payments to be made for this. One can order it, and if dissatisfied, they could just return it without anything paying extra, and all the money spent gets sent back. They also have secure Payments with several different payment methods. One could also easily change their mind when getting something else instead.

More about Robot Lawn Movers Comparison  you can find here : www.evxstore.com/en

 Setting Up The Docking Station:

The m500 or m700 Robot lawnmower would need a docking station to charge. And it would be a place from where it would start its rounds moving the lawn. Once finished with moving the lawn, or if it runs out of battery, it goes back there to its docking station. So setting up the docking station is an essential task to use the m500 or m700 Robot lawnmower. One can follow the following instructions to set up the docking station:

  • This docking station would require a minimum of 30-centimeter clearance on its left and an 80-centimeter clearance on its right.
  • If one has an irrigation system, it is recommended to keep the docking station of the Robot mover away from it. The placement should be away from the irrigation system.
  • If one has an irrigation system, one should be a little more cautious. They can do this by wrapping some amalgamating tape around the dripping holes of the docking station. This way, the docking station can stay protected from water.
  • The docking station then needs to be secured to the grass. This can be done using the included screws and Allen key that came with it.
  • Next, it’s time to power it all up. The LED light on the top of the docking station should go from green to red initially. The red light indicates that the boundary wire isn’t connected. This wire should be connected, or the Robot mover could get lost. This makes it a central part of the setup. It indicates where the ends of the lawn are located.
  • Laying the boundary wire is not a time-consuming process and can be done easily. First, one needs to connect it to the red contact point of the station. And then put it through the bottom of the charging station. Once this is done, one can start pegging it down along the corners of the lawn. If one doesn’t want it to touch something, like the flower beds, one should leave a 10-centimeter distance from it and the flower beds. This boundary wire then acts as a perimeter for the moving robot.
  • After one has laid the boundary wire, one should trim it off. And then connect it back to the remaining connector on the docking station. The docking station light should turn green once one has connected both ends of the boundary wire properly. It would still be red if it were not connected properly. In a short period of time, grass would have grown over the wire to make it look like it isn’t there.
  • To charge the battery, one should place the battery into it and place the mover into the station. And then, one should push the mover into the charging station so that the charging points make contact.

Setting Up The Landroid Itself:

The setting up of the Landroid itself can easily be done via the Landroid app that is available free of charge. One can connect to the mover via Bluetooth to get this done. One can turn on the Landroid using a pin code only the user has. This is for security purposes so that it will not get stolen. It is also made it operate in the area set up with the boundary wire and doesn’t work well, if at all, elsewhere. If the Robot mover required additional support, it sends the owners a notification through the app.

Accessories Available:

There are

a lot of different accessories available for the Landroid. Some may not be necessary at all, but some are almost essential. Depending on various factors and one’s lifestyle, one may choose whether or not to get the accessories. These accessories include:

  • Anti Collision System (ACS):

If one’s lawn is always littered with various objects by kids or pets, then this one is a must. The ACS helps the lawn mover avoid objects in its path and helps it go around them. This is done with the help of ultrasonic sensors. This is mostly for objects with non-permanent positions, so even if they are moved, the Landroid will not run into them.

  • Voice Control:

If one wants to use voice controls to tell the Landroid what to do, then this is what they need. With a built-in speaker, one can use Voice commands.

  • GPS Localization:

This is mainly to recover it from theft. If anyone steals it, one can look up the location of the Landroid on their phone. It uses 4G technology to determine the position of the Landroid.

  • Off Limits:

If one’s lawn has a lot of objects in it, this is what one needs. It puts a digital perimeter around these objects so that the Landroid doesn’t run into them. It is different from the ACS as it is for permanent objects only. So if one moves the objects, the Landroid would run into them because it isn’t within the digital boundaries.

 

Company Name: EXV Store

Address: Aleksanterinkatu 26 A FI-15140 Lahti Finland

Phone: 0800102121

Email: info@evxstore.com



Tags:

USA